O tópico do linux

Esses foram os passos que dei... basicamente!
Não vejo nada de diferente a não ser a instalação de 1 "grub manager" em Win 7, que no meu caso até (ainda) é XP.

Vou dar uma nova tentativa mas, haverá algum programa de gestão de partições que não me lixe o XP?
Posso sempre tentar reaver o XP com o CD de instalação e fazer o "fixmbr"... mas se houver algo clean and easy. [:D]

Edd :)
 
Já há muitos anos que não brinco com o Linux...
Tenho de ver se compro um disco para javardar com o Ubuntu sem dar cabo da minha instalação windows [:D]
Os codec's e leitores de filmes/audio já são fáceis de instalar ou ainda continua a ser um grande pincel?
Como é que estamos de Wine? Aquilo melhorou ou continua na mesma?
Suporte dual monitor é sem stress?
 
Comprei um portátil com o W7 e instalei o XUBUNTU sem desinstalar o W7. Tenho os 2 em conjunto. Fiz isto depois de experimentar as ultimas versões do UBUNTU e do FEDORA.
Prefiro a simplicidade e rapidez do XUBUNTU.
AObre os codecs não sei te dizer porque não custumo usar muito e não sei a diferença do passado para agora.
Quanto ao Wine melhorou um pouco.
Nunca usei dual monitor. [;)]
 
TommyPT disse:
Já há muitos anos que não brinco com o Linux...
Tenho de ver se compro um disco para javardar com o Ubuntu sem dar cabo da minha instalação windows [:D]
Os codec's e leitores de filmes/audio já são fáceis de instalar ou ainda continua a ser um grande pincel?
Como é que estamos de Wine? Aquilo melhorou ou continua na mesma?
Suporte dual monitor é sem stress?
Clique para expandir...


Recomendo para veres Linux Mint.
 
É impressão minha ou esta nova versão do Ubuntu (12.10) está bem mais lenta que as anteriores?
No mesmo pc, fica muito mais lento que o Windows 7 (se bem que estão instalados em discos diferentes, windows em sata2 e ubuntu em sata)
 
Dogzilla disse:
Eu acho que desde que a Canonical se pôs a inventar com o Unity que todo o Ubuntu perdeu bastante com isso. Especialmente em velocidade.
Clique para expandir...
afinal não sou o único achar isso... Ubuntu já não é aquele S.O, limpo e rápido...agora é só merdinhas, pesado, lento...
acabei por instalar o xubuntu, está mais limpo, rápido. Mas acabei por preferir o Linux mint. :)
 
Preciso de ajuda.

Tenho um disco do anterior portátil numa caixa de usb que o Linux não o reconhece.

Já o formatei em NTFS e FAT no W7 e continua a não dar.

O que mais posso fazer?
 
andred disse:
Preciso de ajuda.

Tenho um disco do anterior portátil numa caixa de usb que o Linux não o reconhece.

Já o formatei em NTFS e FAT no W7 e continua a não dar.

O que mais posso fazer?
Clique para expandir...

Que distribuição de linux estás a usar?

É que por defeito o linux não consegue montar essas partições a não ser que tenhas instalado um captive-ntfs ou um ntfs-3g, p.e.

EDIT: O Ubuntu já tem esses packages instalados de origem.
 
andred disse:
Preciso de ajuda.

Tenho um disco do anterior portátil numa caixa de usb que o Linux não o reconhece.

Já o formatei em NTFS e FAT no W7 e continua a não dar.

O que mais posso fazer?
Clique para expandir...

Montaste o disco?

Quando colocares a ficha USB entra como root, numa linha de comandos e faz "dmesg".

Deve aparecer lá o disco (tem referências ao usb).
Verificas onde está a ser montado (sdb1 ou algo semelhante ) e depois é só montares.


fazes mount /dev/sd** /local onde queres montar, e voilá

Pra retirares o disco é só fazer o unmount: umount /local onde montaste o disco
 
augustus disse:
Que distribuição de linux estás a usar?

É que por defeito o linux não consegue montar essas partições a não ser que tenhas instalado um captive-ntfs ou um ntfs-3g, p.e.

EDIT: O Ubuntu já tem esses packages instalados de origem.
Clique para expandir...

Estou a usar o XFCE.

Já estava instalado o captive-ntfs e o não encontro o ntfs-3g.

Tenho o disco ligado directamente a porta de USB e não aparece.

Cheires disse:
Montaste o disco?

Quando colocares a ficha USB entra como root, numa linha de comandos e faz "dmesg".

Deve aparecer lá o disco (tem referências ao usb).
Verificas onde está a ser montado (sdb1 ou algo semelhante ) e depois é só montares.


fazes mount /dev/sd** /local onde queres montar, e voilá

Pra retirares o disco é só fazer o unmount: umount /local onde montaste o disco
Clique para expandir...

Neste momento não aparece para montar. Quando iniciei o portátil, o disco apareceu e deu erro em monta-lo.

Fiz agora o "dmesg" e tudo o que aparece é o seguinte: :confused:

[ 1.266734] ata4: DUMMY
[ 1.266735] ata5: DUMMY
[ 1.266736] ata6: DUMMY
[ 1.267086] Fixed MDIO Bus: probed
[ 1.267103] tun: Universal TUN/TAP device driver, 1.6
[ 1.267104] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.267160] PPP generic driver version 2.4.2
[ 1.267251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.267265] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.267282] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.267286] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.267325] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.267349] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.271221] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.271236] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdff08000
[ 1.285586] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.285777] hub 1-0:1.0: USB hub found
[ 1.285781] hub 1-0:1.0: 2 ports detected
[ 1.285838] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.285851] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.285855] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.285894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.285914] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.289785] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.289798] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdff07000
[ 1.305564] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.305738] hub 2-0:1.0: USB hub found
[ 1.305741] hub 2-0:1.0: 2 ports detected
[ 1.305795] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.305806] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.305836] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.305856] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 1.305861] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.305899] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.315535] xhci_hcd 0000:04:00.0: irq 19, io mem 0xde000000
[ 1.315604] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
[ 1.315610] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 1.315615] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 1.315759] xHCI xhci_add_endpoint called for root hub
[ 1.315761] xHCI xhci_check_bandwidth called for root hub
[ 1.315784] hub 3-0:1.0: USB hub found
[ 1.315792] hub 3-0:1.0: 2 ports detected
[ 1.315844] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.315881] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 1.315968] xHCI xhci_add_endpoint called for root hub
[ 1.315969] xHCI xhci_check_bandwidth called for root hub
[ 1.315991] hub 4-0:1.0: USB hub found
[ 1.315999] hub 4-0:1.0: 2 ports detected
[ 1.329654] usbcore: registered new interface driver libusual
[ 1.329703] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.331278] i8042: Detected active multiplexing controller, rev 1.1
[ 1.332167] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.332173] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.332199] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.332220] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.332242] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.332351] mousedev: PS/2 mouse device common for all mice
[ 1.332520] rtc_cmos 00:06: RTC can wake from S4
[ 1.332631] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.332660] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.332712] device-mapper: uevent: version 1.0.3
[ 1.332781] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.332809] EISA: Probing bus 0 at eisa.0
[ 1.332810] EISA: Cannot allocate resource for mainboard
[ 1.332813] Cannot allocate resource for EISA slot 1
[ 1.332814] Cannot allocate resource for EISA slot 2
[ 1.332816] Cannot allocate resource for EISA slot 3
[ 1.332817] Cannot allocate resource for EISA slot 4
[ 1.332819] Cannot allocate resource for EISA slot 5
[ 1.332820] Cannot allocate resource for EISA slot 6
[ 1.332822] Cannot allocate resource for EISA slot 7
[ 1.332823] Cannot allocate resource for EISA slot 8
[ 1.332825] EISA: Detected 0 cards.
[ 1.332833] cpufreq-nforce2: No nForce2 chipset.
[ 1.332897] cpuidle: using governor ladder
[ 1.332998] cpuidle: using governor menu
[ 1.333000] EFI Variables Facility v0.08 2004-May-17
[ 1.333171] TCP cubic registered
[ 1.333274] NET: Registered protocol family 10
[ 1.333680] NET: Registered protocol family 17
[ 1.333683] Registering the dns_resolver key type
[ 1.333700] Using IPI No-Shortcut mode
[ 1.334115] PM: Hibernation image not present or could not be loaded.
[ 1.334128] registered taskstats version 1
[ 1.340894] Magic number: 8:123:693
[ 1.340982] rtc_cmos 00:06: setting system clock to 2012-12-02 17:41:28 UTC (1354470088)
[ 1.341447] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.341449] EDD information not available.
[ 1.366685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.585347] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.585395] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.586525] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.586798] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.586810] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.591814] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.591827] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.594135] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, AS01, max UDMA/100
[ 1.597328] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.599168] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.599181] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.601485] ata2.00: configured for UDMA/100
[ 1.634794] ata1.00: ATA-8: ST9320325AS, 0003BSM1, max UDMA/133
[ 1.634805] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.636906] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.637309] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.637321] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.639243] ata1.00: configured for UDMA/133
[ 1.639534] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0003 PQ: 0 ANSI: 5
[ 1.639727] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.639764] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.639769] sd 0:0:0:0: [sda] Write Protect is off
[ 1.639771] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.639788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.647432] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB AS01 PQ: 0 ANSI: 5
[ 1.657108] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.657118] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.657389] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.657533] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.689380] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.690637] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.690749] Freeing unused kernel memory: 744k freed
[ 1.690928] Write protecting the kernel text: 5828k
[ 1.690944] Write protecting the kernel read-only data: 2380k
[ 1.690945] NX-protecting the kernel data: 4412k
[ 1.705677] udevd[97]: starting version 175
[ 1.729561] hub 1-1:1.0: USB hub found
[ 1.729650] hub 1-1:1.0: 6 ports detected
[ 1.776122] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.776133] atl1c 0000:05:00.0: setting latency timer to 64
[ 1.825065] Refined TSC clocksource calibration: 2195.014 MHz.
[ 1.825079] Switching to clocksource tsc
[ 1.840994] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.901606] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 1.973841] hub 2-1:1.0: USB hub found
[ 1.973881] hub 2-1:1.0: 6 ports detected
[ 2.044824] usb 1-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.348622] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 2.441149] hub 2-1.1:1.0: USB hub found
[ 2.441267] hub 2-1.1:1.0: 7 ports detected
[ 2.641551] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.712235] usb 2-1.1.6: new low-speed USB device number 4 using ehci_hcd
[ 16.414796] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.427219] udevd[334]: starting version 175
[ 16.472622] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 16.473956] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.473963] mei 0000:00:16.0: setting latency timer to 64
[ 16.474028] mei 0000:00:16.0: irq 49 for MSI/MSI-X
[ 16.476627] lp: driver loaded but no devices found
[ 16.483182] [drm] Initialized drm 1.1.0 20060810
[ 16.499897] cfg80211: Calling CRDA to update world regulatory domain
[ 16.505134] [drm] radeon defaulting to kernel modesetting.
[ 16.505137] [drm] radeon kernel modesetting enabled.
[ 16.505189] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.505194] radeon 0000:01:00.0: setting latency timer to 64
[ 16.515570] Adding 4167676k swap on /dev/sda6. Priority:-1 extents:1 across:4167676k
[ 16.519548] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x1043:0x2002).
[ 16.519592] [drm] register mmio base: 0xDFE20000
[ 16.519594] [drm] register mmio size: 131072
[ 16.520040] ATOM BIOS: Asus
[ 16.521589] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 16.521593] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 16.522369] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 16.522372] [drm] RAM width 64bits DDR
[ 16.524023] [TTM] Zone kernel: Available graphics memory: 419294 kiB.
[ 16.524026] [TTM] Zone highmem: Available graphics memory: 2048744 kiB.
[ 16.524027] [TTM] Initializing pool allocator.
[ 16.524047] [drm] radeon: 1024M of VRAM memory ready
[ 16.524048] [drm] radeon: 512M of GTT memory ready.
[ 16.524060] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.524062] [drm] Driver supports precise vblank timestamp query.
[ 16.524107] radeon 0000:01:00.0: irq 50 for MSI/MSI-X
[ 16.524113] radeon 0000:01:00.0: radeon: using MSI.
[ 16.524157] [drm] radeon: irq initialized.
[ 16.524161] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 16.528767] [drm] Loading CAICOS Microcode
[ 16.558186] wmi: Mapper loaded
[ 16.562188] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.562202] ath9k 0000:03:00.0: setting latency timer to 64
[ 16.598936] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[ 16.605481] Linux video capture interface: v2.00
[ 16.605913] uvcvideo: Found UVC 1.00 device ASUS USB2.0 WebCam (058f:a014)
[ 16.606031] acpi device:04: registered as cooling_device2
[ 16.606181] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
[ 16.606223] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.643630] ath: EEPROM regdomain: 0x60
[ 16.643632] ath: EEPROM indicates we should expect a direct regpair map
[ 16.643635] ath: Country alpha2 being used: 00
[ 16.643636] ath: Regpair used: 0x60
[ 16.651739] input: ASUS USB2.0 WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 16.652446] usbcore: registered new interface driver uvcvideo
[ 16.652449] USB Video Class driver (1.1.1)
[ 16.656846] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656852] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656857] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656859] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656861] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656865] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656867] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656869] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656871] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656873] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656875] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656877] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656879] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656881] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656883] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656885] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656887] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656889] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656893] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656895] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656897] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656899] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.656901] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 16.656903] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 16.658436] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.690721] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 16.691392] Registered led device: ath9k-phy0
[ 16.691399] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8720000, irq=17
[ 16.698459] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.698537] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 16.698563] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 16.703494] input: Microsoft Microsoft Wireless Optical Mouse\xffffffc2\xffffffae\xffffffae 1.00 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.6/2-1.1.6:1.0/input/input6
[ 16.703599] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse\xffffffc2\xffffffae\xffffffae 1.00] on usb-0000:00:1d.0-1.1.6/input0
[ 16.703620] usbcore: registered new interface driver usbhid
[ 16.703622] usbhid: USB HID core driver
[ 16.709181] type=1400 audit(1354470103.884:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=578 comm="apparmor_parser"
[ 16.709602] type=1400 audit(1354470103.884:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=578 comm="apparmor_parser"
[ 16.709852] type=1400 audit(1354470103.884:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=578 comm="apparmor_parser"
[ 16.759766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 16.759838] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.822179] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.863917] asus_wmi: ASUS WMI generic driver loaded
[ 16.866282] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 16.866389] asus_wmi: Initialization: 0x1
[ 16.866439] asus_wmi: BIOS WMI version: 7.6
[ 16.866487] asus_wmi: SFUN value: 0x1a0877
[ 16.872996] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input9
[ 16.888756] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.888760] cfg80211: World regulatory domain updated:
[ 16.888761] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.888764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.888766] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.888768] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.888770] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.888772] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.941753] asus_wmi: Backlight controlled by ACPI video driver
[ 17.062726] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 17.357398] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[ 17.390399] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 17.707586] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 17.710468] radeon 0000:01:00.0: WB enabled
[ 17.713199] init: failsafe main process (839) killed by TERM signal
[ 17.727284] [drm] ring test succeeded in 2 usecs
[ 17.727418] [drm] radeon: ib pool ready.
[ 17.727531] [drm] ib test succeeded in 0 usecs
[ 17.730142] [drm] Radeon Display Connectors
[ 17.730145] [drm] Connector 0:
[ 17.730146] [drm] LVDS
[ 17.730148] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 17.730150] [drm] Encoders:
[ 17.730151] [drm] LCD1: INTERNAL_UNIPHY
[ 17.730153] [drm] Connector 1:
[ 17.730154] [drm] HDMI-A
[ 17.730155] [drm] HPD1
[ 17.730157] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 17.730158] [drm] Encoders:
[ 17.730159] [drm] DFP1: INTERNAL_UNIPHY1
[ 17.730161] [drm] Connector 2:
[ 17.730162] [drm] VGA
[ 17.730164] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 17.730165] [drm] Encoders:
[ 17.730166] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.730211] [drm] Internal thermal controller without fan control
[ 17.731070] [drm] radeon: power management initialized
[ 17.801544] Bluetooth: Core ver 2.16
[ 17.801584] NET: Registered protocol family 31
[ 17.801585] Bluetooth: HCI device and connection manager initialized
[ 17.801588] Bluetooth: HCI socket layer initialized
[ 17.801589] Bluetooth: L2CAP socket layer initialized
[ 17.801902] Bluetooth: SCO socket layer initialized
[ 17.803761] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.803764] Bluetooth: BNEP filters: protocol multicast
[ 17.824346] ppdev: user-space parallel port driver
[ 17.856162] Bluetooth: RFCOMM TTY layer initialized
[ 17.856167] Bluetooth: RFCOMM socket layer initialized
[ 17.856169] Bluetooth: RFCOMM ver 1.11
[ 17.864531] type=1400 audit(1354470105.040:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=918 comm="apparmor_parser"
[ 17.869733] type=1400 audit(1354470105.044:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=918 comm="apparmor_parser"
[ 17.894902] type=1400 audit(1354470105.068:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=949 comm="apparmor_parser"
[ 17.896553] type=1400 audit(1354470105.072:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=950 comm="apparmor_parser"
[ 17.901086] type=1400 audit(1354470105.076:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=950 comm="apparmor_parser"
[ 17.901325] type=1400 audit(1354470105.076:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=950 comm="apparmor_parser"
[ 17.905083] type=1400 audit(1354470105.080:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=953 comm="apparmor_parser"
[ 17.967197] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.967983] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.974598] atl1c 0000:05:00.0: irq 52 for MSI/MSI-X
[ 18.059779] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.061227] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.145634] [drm] fb mappable at 0xC0142000
[ 18.145637] [drm] vram apper at 0xC0000000
[ 18.145639] [drm] size 4325376
[ 18.145640] [drm] fb depth is 24
[ 18.145641] [drm] pitch is 5632
[ 18.145803] fbcon: radeondrmfb (fb0) is primary device
[ 18.145877] Console: switching to colour frame buffer device 170x48
[ 18.145908] fb0: radeondrmfb frame buffer device
[ 18.145910] drm: registered panic notifier
[ 18.145916] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 18.145952] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.146013] snd_hda_intel 0000:01:00.1: irq 53 for MSI/MSI-X
[ 18.146035] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 18.195427] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 18.195512] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 19.962602] init: plymouth-stop pre-start process (1357) terminated with status 1
[ 20.906465] wlan0: authenticate with 00:1f:c6:8d:cb:dc (try 1)
[ 20.908476] wlan0: authenticated
[ 20.937862] wlan0: associate with 00:1f:c6:8d:cb:dc (try 1)
[ 20.940877] wlan0: RX AssocResp from 00:1f:c6:8d:cb:dc (capab=0x411 status=0 aid=1)
[ 20.940881] wlan0: associated
[ 20.941168] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.764123] wlan0: no IPv6 routers present
[ 3513.807659] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 3515.579862] usb 3-1: ep 0x1 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 3515.579873] usb 3-1: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 3515.602607] Initializing USB Mass Storage driver...
[ 3515.602716] scsi6 : usb-storage 3-1:1.0
[ 3515.602791] usbcore: registered new interface driver usb-storage
[ 3515.602793] USB Mass Storage support registered.
[ 3515.731182] usbcore: registered new interface driver uas
[ 3516.601418] scsi 6:0:0:0: Direct-Access Generic USB Disk 9.02 PQ: 0 ANSI: 2
[ 3516.603235] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3516.605171] sd 6:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 3516.607242] sd 6:0:0:0: [sdb] Write Protect is off
[ 3516.607251] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3516.607766] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3516.607773] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3516.610047] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3516.610054] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3516.670864] sdb: sdb1 sdb2 < sdb5 >
[ 3516.781101] sd 6:0:0:0: [sdb] No Caching mode page present
[ 3516.781105] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3516.781108] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3806.995210] WARNING! power/level is deprecated; use power/control instead
[ 3806.995355] xhci_hcd 0000:04:00.0: WARN Event TRB for slot 1 ep 4 with no TDs queued?
[ 3806.995432] xhci_hcd 0000:04:00.0: WARN Event TRB for slot 1 ep 1 with no TDs queued?
[ 3806.995513] xhci_hcd 0000:04:00.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
[ 3807.103763] xhci_hcd 0000:04:00.0: WARN Event TRB for slot 1 ep 0 with no TDs queued?
[ 3807.133579] usb 3-1: USB disconnect, device number 2
[ 3817.546049] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 3817.792561] usb 3-1: Device not responding to set address.
[ 3822.987996] xhci_hcd 0000:04:00.0: Timeout while waiting for address device command
[ 3834.015884] usb 3-1: device not accepting address 3, error -62
[ 3834.015925] xhci_hcd 0000:04:00.0: ERROR no room on ep ring
[ 3834.015931] xhci_hcd 0000:04:00.0: ERR: No room for command on command ring
[ 3834.015941] xhci_hcd 0000:04:00.0: ERROR no room on ep ring
[ 3834.015945] xhci_hcd 0000:04:00.0: ERR: No room for command on command ring
[ 3834.015952] hub 3-0:1.0: couldn't allocate port 1 usb_device
[ 3834.143670] xhci_hcd 0000:04:00.0: ERROR no room on ep ring
[ 3834.143675] xhci_hcd 0000:04:00.0: ERR: No room for command on command ring
[ 3834.143678] hub 3-0:1.0: couldn't allocate port 1 usb_device
[ 3861.829439] xhci_hcd 0000:04:00.0: ERROR no room on ep ring
[ 3861.829450] xhci_hcd 0000:04:00.0: ERR: No room for command on command ring
[ 3861.829472] hub 3-0:1.0: couldn't allocate port 1 usb_device
[ 3922.662771] usb 2-1.1.1: new low-speed USB device number 5 using ehci_hcd
[ 3922.734669] usb 2-1.1.1: device descriptor read/64, error -32
[ 3922.866796] hub 2-1.1:1.0: unable to enumerate USB device on port 1
[ 3923.098266] usb 2-1.1.1: new low-speed USB device number 6 using ehci_hcd
[ 3923.170313] usb 2-1.1.1: device descriptor read/64, error -32
[ 3923.346004] usb 2-1.1.1: device descriptor read/64, error -32
[ 3923.521811] usb 2-1.1.1: new low-speed USB device number 7 using ehci_hcd
[ 3923.593726] usb 2-1.1.1: device descriptor read/64, error -32
[ 3923.769520] usb 2-1.1.1: device descriptor read/64, error -32
[ 3923.945337] usb 2-1.1.1: new low-speed USB device number 8 using ehci_hcd
[ 3924.352709] usb 2-1.1.1: device not accepting address 8, error -32
[ 3924.424803] usb 2-1.1.1: new low-speed USB device number 9 using ehci_hcd
[ 3924.832225] usb 2-1.1.1: device not accepting address 9, error -32
[ 3924.832481] hub 2-1.1:1.0: unable to enumerate USB device on port 1
[ 3931.101570] usb 2-1.1.1: new low-speed USB device number 10 using ehci_hcd
[ 3931.173331] usb 2-1.1.1: device descriptor read/64, error -32
[ 3931.349295] usb 2-1.1.1: device descriptor read/64, error -32
[ 3931.525104] usb 2-1.1.1: new low-speed USB device number 11 using ehci_hcd
[ 3931.597015] usb 2-1.1.1: device descriptor read/64, error -32
[ 3931.772818] usb 2-1.1.1: device descriptor read/64, error -32
[ 3931.948621] usb 2-1.1.1: new low-speed USB device number 12 using ehci_hcd
[ 3932.355921] usb 2-1.1.1: device not accepting address 12, error -32
[ 3932.428078] usb 2-1.1.1: new low-speed USB device number 13 using ehci_hcd
[ 3932.835397] usb 2-1.1.1: device not accepting address 13, error -32
[ 3932.835653] hub 2-1.1:1.0: unable to enumerate USB device on port 1
[ 3934.937303] usb 2-1.1.1: new low-speed USB device number 14 using ehci_hcd
[ 3935.009067] usb 2-1.1.1: device descriptor read/64, error -32
[ 3935.185026] usb 2-1.1.1: device descriptor read/64, error -32
[ 3935.360845] usb 2-1.1.1: new low-speed USB device number 15 using ehci_hcd
[ 3935.432755] usb 2-1.1.1: device descriptor read/64, error -32
[ 3935.608559] usb 2-1.1.1: device descriptor read/64, error -32
[ 3935.728747] hub 2-1.1:1.0: unable to enumerate USB device on port 1
[ 3940.163391] xhci_hcd 0000:04:00.0: ERROR no room on ep ring
[ 3940.163403] xhci_hcd 0000:04:00.0: ERR: No room for command on command ring
[ 3940.163411] hub 3-0:1.0: couldn't allocate port 1 usb_device
Clique para expandir...
 
Uso GNU/Linux á quase 10 anos, desde o primero portatil que comprei, um toshiba satelite A-60 PRO estive a ler este tópico, e uma coisa que achei curioso é a parte das partições, para quê entulhar o hd com tantas partições se se pode usar apenas duas o / e a swap.
Ainda mais com users novos.
É como monto sempre, nunca me deparei com a carrada de problemas que os users deste tópico têm vindo a exprimir nestas cento e tal pag.
 
m4nn1pul0 disse:
Uso GNU/Linux á quase 10 anos, desde o primero portatil que comprei, um toshiba satelite A-60 PRO estive a ler este tópico, e uma coisa que achei curioso é a parte das partições, para quê entulhar o hd com tantas partições se se pode usar apenas duas o / e a swap.
Ainda mais com users novos.
É como monto sempre, nunca me deparei com a carrada de problemas que os users deste tópico têm vindo a exprimir nestas cento e tal pag.
Clique para expandir...
a /home é muito útil... isto se quiseres mudar de distro de uma forma fácil, ou se a distro que usas colocou nos repositórios algo que estraga o sistema.
aconteceu-me quando usei sidux, e quando fiz asneira com o gentoo

portanto, IMHO, 3 partições:
/swap
/
/home

mais a que possivelmente existam no M$ para quem tem dual boot
 
ElGamal disse:
a /home é muito útil... isto se quiseres mudar de distro de uma forma fácil, ou se a distro que usas colocou nos repositórios algo que estraga o sistema.
aconteceu-me quando usei sidux, e quando fiz asneira com o gentoo

portanto, IMHO, 3 partições:
/swap
/
/home

mais a que possivelmente existam no M$ para quem tem dual boot
Clique para expandir...


Eu mudo de distro de forma fácil, mesmo com dualboot, se usasse podia sempre instalar de novo.
No meu caso nunca usei dualboot, pois como disse antes, mal tomei conhecimento da alternativa a windows, apenas usei e uso até hoje gnu/linux.
Os problemas que aparecem por aqui, é a pessoas consideradas novatas, que nem coisas simples conseguem ainda resolver ou aprender por elas, quanto mais andarem a colar partes e a remendar a distro.

Eu acho que não faz sentido nenhum, mas é apenas a minha opinião, deve-se aprender pelo mais fácil e ir evoluindo para as mais dificieis.
Quanto aos users com problemas, têm mais sorte do que eu, que na altura nem net ainda tinha, acedi a uma distro, salvo erro fedora, atraves de uma revista informatica e a partir daí as duvidas que tinha, tive de ir explorando sozinho e de tempos a tempos lá vinha algo de novo que me dava umas luzes atraves dessa revista de informática.
Linux naquela altura era apenas na secção do leitor, e um ou outro artigo em genero de piadola, toda a revista era dedicada á ms e windows programas.
Um ano mais tarde lá consegui uma ligação á net e aí já tinha ajuda online, desnecessária.. lol
Quem vem para gnu/linux, não pode pensar que é tudo rosas, deve estar preparado para trilhar caminhos sem estrada, ser persistente para vencer e ganhar conhecimentos minimos que lhe permitam desenrascar na maioria das situações.

Nada como li por aqui.. lol
Um ou outro user testa e instala e numa hora ou menos, diz que é uma porcaria, não funciona, chama nomes, decide que não é para ele.. lol
 
Última edição:
andred disse:
Estou a usar o XFCE.

Já estava instalado o captive-ntfs e o não encontro o ntfs-3g.

Tenho o disco ligado directamente a porta de USB e não aparece.



Neste momento não aparece para montar. Quando iniciei o portátil, o disco apareceu e deu erro em monta-lo.

Fiz agora o "dmesg" e tudo o que aparece é o seguinte: :confused:
Clique para expandir...



[ 3935.608559] usb 2-1.1.1: device descriptor read/64, error -32
[ 3935.728747] hub 2-1.1:1.0: unable to enumerate USB device on port 1


Está com erro, por isso não aparece.
 
capturadeecrade20121213.jpg
 
Deve fazer início de sessão ou registar-se para responder aqui.
Voltar
Superior