Tópico da Apple

Actualizei a app do Messenger num 7 e num 6s, está sempre a rebentar. Está a acontecer a mais alguém?

Também me estava a acontecer a app só a rebentar e precisava mesmo de falar com várias pessoas.

Ainda pensei que fosse dos primeiros sinais que precisava de atualizar o 6S para o iOS 11, mas depois pensei, epa quem tem o 4S q correr iOS 9 ainda pode usar a app na última release e não pode ter iOS 10 nem 11 e os iPhones 5/5C no máximo estão no 10.3.3 como eu tenho no 6S.

Por acaso nem me lembrei de experimentar no iPad 6th gen que está a correr iOS 11.4, mas entretanto saiu um pequeno update e já resolveu o problema.

Assim sendo continuo a rodar o iOS 10 old school
 
Mesmo assim uso uma versão mais antiga da app do messenger e do facebook + tweaks do cydia que me permite ficar totalmente invisível, posso ler mensagens sem "dizer" que as li e estar online sem que os outros vejam há quanto tempo estive ligado

A app oficial também permite estar online aparentando estar offline.
 
A app oficial também permite estar online aparentando estar offline.

A app que uso é a oficial, só que desactualizada, no meu caso fico totalmente offline, em casos normais o utilizador anda por lá a ver o feed, fecha a app e depois no messenger, online há x minutos ou online agora, mesmo estando desligado na app.
 
Entre ontem e hoje o meu iPhone padece de “SIM inválido”, fazendo com que tenha de desligar e voltar a ligar para activar o cartão. Provavelmente é mesmo maleita do cartão não é? Neste caso é Vodafone, é caso para lá ir ou isto pode ser só momentâneo?
 
Eu utilizo o Pillow porque é gratuita mas dizem que a melhor é a AutoSleep pois detecta quando adormeces.

Eu uso a AutoSleep e é muito boa.

Se eu disser no relógio que "apaguei as luzes" a app até conta o tempo que demorei a adormecer.


Só peca pela aglomeração de informação que pode tornar-se confuso...
 
Estou com um problema no meu iPad, ou melhor, problema ao utilizar o MEO Go [s)]

de há uns tempos para cá, deixei de conseguir ver os canais de tv no MEO Go, estando normalmente em casa na rede MEO. Dá sempre a mensagem que não é possível ver os canais, que só é possível em território nacional [8b]

Já liguei para o apoio a cliente MEO e eles dizem-me que será uma aplicação qualquer no iPad que está a fazer com que o IP seja reconhecido como sendo estrangeiro e não de Portugal :eek:
já alguém passou por isto? :confused:

não faço ideia como resolver ...
 
Estou com um problema no meu iPad, ou melhor, problema ao utilizar o MEO Go [s)]

de há uns tempos para cá, deixei de conseguir ver os canais de tv no MEO Go, estando normalmente em casa na rede MEO. Dá sempre a mensagem que não é possível ver os canais, que só é possível em território nacional [8b]

Já liguei para o apoio a cliente MEO e eles dizem-me que será uma aplicação qualquer no iPad que está a fazer com que o IP seja reconhecido como sendo estrangeiro e não de Portugal :eek:
já alguém passou por isto? :confused:

não faço ideia como resolver ...

Estás a usar alguma VPN?
Ou tens algum software que inclua VPN?
 
Não. Uso a rede normal de casa, nada mais. :confused:

Usa este site: https://www.iplocation.net
Vê onde é que o gajo diz que estás (rede/ISP e país).

Se não é nada do tablet, poderá ser que tenhas o router infectado.
https://www.pcmag.com/news/361431/is-your-router-vulnerable-to-vpnfilter-malware
UPDATE 6/7: Cisco this week discovered a new capability in VPNFilter; it can secretly inject malicious content over the web traffic that passes through an infected router. Here are the affected devices:

ASUS DEVICES:
RT-AC66U (new)
RT-N10 (new)
RT-N10E (new)
RT-N10U (new)
RT-N56U (new)
RT-N66U (new)
D-LINK DEVICES:
DES-1210-08P (new)
DIR-300 (new)
DIR-300A (new)
DSR-250N (new)
DSR-500N (new)
DSR-1000 (new)
DSR-1000N (new)
HUAWEI DEVICES:
HG8245 (new)
LINKSYS DEVICES:
E1200
E2500
E3000 (new)
E3200 (new)
E4200 (new)
RV082 (new)
WRVS4400N
MIKROTIK DEVICES:
CCR1009 (new)
CCR1016
CCR1036
CCR1072
CRS109 (new)
CRS112 (new)
CRS125 (new)
RB411 (new)
RB450 (new)
RB750 (new)
RB911 (new)
RB921 (new)
RB941 (new)
RB951 (new)
RB952 (new)
RB960 (new)
RB962 (new)
RB1100 (new)
RB1200 (new)
RB2011 (new)
RB3011 (new)
RB Groove (new)
RB Omnitik (new)
STX5 (new)
NETGEAR DEVICES:
DG834 (new)
DGN1000 (new)
DGN2200
DGN3500 (new)
FVS318N (new)
MBRN3000 (new)
R6400
R7000
R8000
WNR1000
WNR2000
WNR2200 (new)
WNR4000 (new)
WNDR3700 (new)
WNDR4000 (new)
WNDR4300 (new)
WNDR4300-TN (new)
UTM50 (new)
QNAP DEVICES:
TS251
TS439 Pro
Other QNAP NAS devices running QTS software
TP-LINK DEVICES:
R600VPN
TL-WR741ND (new)
TL-WR841N (new)
UBIQUITI DEVICES:
NSM2 (new)
PBE M5 (new)
UPVEL DEVICES:
Unknown Models* (new)
ZTE DEVICES:
ZXHN H108N (new)
Original Story:
The Justice Department last week urged everyone with a small office home office (SOHO) or NAS device to reboot their gadgets immediately in order to thwart VPNFilter, a new strain of malware that can brick your router.


SecurityWatchThe FBI seized a domain used to send commands to the infected devices, but it can't hurt to reboot anyway.


As Symantec outlines, VPNFilter is "a multi-staged piece of malware." Stage 1 makes the connection, Stage 2 delivers the goods, and Stage 3 acts as plugins for Stage 2. "These include a packet sniffer for spying on traffic that is routed through the device, including theft of website credentials and monitoring of Modbus SCADA protocols. Another Stage 3 module allows Stage 2 to communicate using Tor."


VPNFilter "is unlike most other IoT threats because it is capable of maintaining a persistent presence on an infected device, even after a reboot," Symantec says.


Still, "rebooting will remove Stage 2 and any Stage 3 elements present on the device, [temporarily removing] the destructive component of VPNFilter. However, if infected, the continuing presence of Stage 1 means that Stages 2 and 3 can be reinstalled by the attackers."


Those who believe they're infected should do a hard reset, which restores factory settings. Look for a small reset button on your device, though this will wipe any credentials you have stored on the device.


Below is a list of routers Symantec identified as vulnerable to VPNFilter. MikroTik tells Symantec that VPNFilter likely proliferated via a bug in MikroTik RouterOS software, which it patched in March 2017. "Upgrading RouterOS software deletes VPNFilter, any other third-party files and patches the vulnerability," Symantec says.


Netgear "strongly advise all Netgear router owners" to: update their router firmware; change the default admin password if that's never been updated; and make sure remote management is turned off on the router (here's how).


Linksys E1200
Linksys E2500
Linksys WRVS4400N
Mikrotik RouterOS for Cloud Core Routers: Versions 1016, 1036, and 1072
Netgear DGN2200
Netgear R6400
Netgear R7000
Netgear R8000
Netgear WNR1000
Netgear WNR2000
QNAP TS251
QNAP TS439 Pro
Other QNAP NAS devices running QTS software
TP-Link R600VPN
"No other vendors, including Cisco, have been observed as infected by VPNFilter, but our research continues," according to Cisco Talos, which first reported the bug.


To date, Cisco Talos estimates that at least 500,000 in at least 54 countries have been hit by VPNFilter.


The feds are pinning this attack on Fancy Bear, a hacking group also known as APT28 and Sofacy Group, among other monikers. The group is notorious for attacking governments across the world and stealing confidential files from the Democratic National Committee during the 2016 election.


Editor's Note: This story was updated on 5/30 with details from Netgear.
 
Voltar
Superior