<center>-------------Press Release-------------</center>
Peugeot 207 Super 2000 Breaks Cover
* New Peugeot 207 Super 2000 Rally Car starts testing
* 207 Super 2000 follows in the footsteps of the 205 T16 and 206 WRC
The Peugeot 207 RCup Concept Car presented at the Geneva Motor Show in March gave clues to the future 207 Super 2000. Now the next Peugeot Rally Car has completed its initial development stages on both loose and tarmac surfaces.
On 16 May, the 207 Super 2000 fired into life for the first time, watched by Bruno Famin, Technical Manager of Peugeot Sport and Bertrand Vallat, Project Manager for the 207 Super 2000. It now follows in the footsteps of the other great Peugeot Rally cars of old, such as the 205 T16 and the all conquering 206 WRC, winner of three world rally championships and a total of 65 podiums.
The car then immediately started a series of tests on both loose surface and then on tarmac. The drivers entrusted with the development of the car are Bryan Bouffier, Sebastian Lindholm and Gilles Panizzi.
Bertrand Vallat, Project Manager, commented: “To start with on the loose surface, the 207 Super 2000 showed a good level of reliability which was confirmed again on tarmac some weeks later. We are only at the initial stages of development but all the test drivers who have followed each other behind the wheel of the car have been satisfied with both the handling and performance.”
The Peugeot 207 Super 2000 will be available for customers to campaign in national championships.
TECHNICAL DATA PEUGEOT 207 SUPER 2000
MOTOR
Engine
EW 10 J4S
Location
Front – transverse
Capacity
1998 cc
Number of cylinders
4
Power (hp.DIN)
280
Torque (Nm)
250
Maximum engine speed
8500
Injection
Magneti Marelli
Throttle
Single butterfly
Number of valves
16
TRANSMISSION
Type
4-wheel drive
Clutch
Twin disc
Gearbox
Sequential – 6 speed
Differential
3 Autolocking
CHASSIS
Structure
Bodyshell + Tubular Roll Cage
Front suspension
Pseudo MacPherson Strut with Peugeot Dampers
Rear suspension
Pseudo MacPherson Strut with Peugeot Dampers
BRAKES / STEERING
Front brakes
Brembo 4 pistons
Diameter 300mm (loose surface) 355mm (tarmac)
Rear brakes
Brembo 4 pistons
Diameter 300mm (loose surface and tarmac)
Steering
Hydraulic assistance
Wheels loose surface
18 inches
Wheels tarmac
15 inches
DIMENSIONS
Length
4.03 m
Width
1.80 m
Wheelbase
2.56 m
Minimum weight
1100 kg loose surface / 1150 kg tarmac
Fuel tank capacity
80 litres
<center>-------------Press Release-------------</center>
<center>
</center>
Peugeot 207 Super 2000 Breaks Cover
* New Peugeot 207 Super 2000 Rally Car starts testing
* 207 Super 2000 follows in the footsteps of the 205 T16 and 206 WRC
The Peugeot 207 RCup Concept Car presented at the Geneva Motor Show in March gave clues to the future 207 Super 2000. Now the next Peugeot Rally Car has completed its initial development stages on both loose and tarmac surfaces.
On 16 May, the 207 Super 2000 fired into life for the first time, watched by Bruno Famin, Technical Manager of Peugeot Sport and Bertrand Vallat, Project Manager for the 207 Super 2000. It now follows in the footsteps of the other great Peugeot Rally cars of old, such as the 205 T16 and the all conquering 206 WRC, winner of three world rally championships and a total of 65 podiums.
The car then immediately started a series of tests on both loose surface and then on tarmac. The drivers entrusted with the development of the car are Bryan Bouffier, Sebastian Lindholm and Gilles Panizzi.
Bertrand Vallat, Project Manager, commented: “To start with on the loose surface, the 207 Super 2000 showed a good level of reliability which was confirmed again on tarmac some weeks later. We are only at the initial stages of development but all the test drivers who have followed each other behind the wheel of the car have been satisfied with both the handling and performance.”
The Peugeot 207 Super 2000 will be available for customers to campaign in national championships.
TECHNICAL DATA PEUGEOT 207 SUPER 2000
MOTOR
Engine
EW 10 J4S
Location
Front – transverse
Capacity
1998 cc
Number of cylinders
4
Power (hp.DIN)
280
Torque (Nm)
250
Maximum engine speed
8500
Injection
Magneti Marelli
Throttle
Single butterfly
Number of valves
16
TRANSMISSION
Type
4-wheel drive
Clutch
Twin disc
Gearbox
Sequential – 6 speed
Differential
3 Autolocking
CHASSIS
Structure
Bodyshell + Tubular Roll Cage
Front suspension
Pseudo MacPherson Strut with Peugeot Dampers
Rear suspension
Pseudo MacPherson Strut with Peugeot Dampers
BRAKES / STEERING
Front brakes
Brembo 4 pistons
Diameter 300mm (loose surface) 355mm (tarmac)
Rear brakes
Brembo 4 pistons
Diameter 300mm (loose surface and tarmac)
Steering
Hydraulic assistance
Wheels loose surface
18 inches
Wheels tarmac
15 inches
DIMENSIONS
Length
4.03 m
Width
1.80 m
Wheelbase
2.56 m
Minimum weight
1100 kg loose surface / 1150 kg tarmac
Fuel tank capacity
80 litres
<center>-------------Press Release-------------</center>
<center>
</center>
]
